home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 5
/
QRZ Ham Radio Callsign Database - Volume 5.iso
/
mods
/
dr180t.mod
< prev
next >
Wrap
Internet Message Format
|
1994-11-13
|
3KB
Date: Thu, 11 Nov 1993 15:32:24 -0600
From: pschleck@cwis.unomaha.edu (Paul W Schleck KD3FU)
To: bowen@cs.Buffalo.EDU
Subject: Alinco 1600 Packet Mod/Interface, Please Archive
Status: RO
>From: msanders@sim.es.com (Milt Sanders)
>Subject: Re: Wanted: Pinouts for Alinco HT for Packet
>Date: Thu, 11 Nov 1993 11:41:03 -0700
In article <msanders-111193094034@msanders.sim.es.com>, msanders@sim.es.com
(Milt Sanders) wrote:
> I just purchased a TNC last night and was trying to find out how to hook it
> to my DJ-180T Alinco HT. My two other rigs have the required data in their
> manuals, but the Alinco HT does not. Does anyone have the data/circuit
> necessary for the external mic connections to hook up to packet? I will
> publish any replies plus my successful connection diagram when it gets
> done.
>
> Thanks in advance
>
Just got FAX back from Alinco: nice service: about 1 hour and in hard
copy!
Alinco DJ-180T Packet Connection
2.5mm stereo plug
<----------0xooxoo[[[[]]]]]]]
. | | |
to mic | | |
jack | | |___________________________._______ground (TNC)
| | sleeve
| |__________o Ring - open
| 0.1-1.0 uF capacitor
|________________.______| |__________audio output TNC
| | |
|
|--------/\/\/\/\--------PTT TNC
. 4.7-33K ohm resistor
3.5mm mono plug
<-----------0xoooooo[[[[[[[[[[[]]]]]]]]]]
| |
| |______________________________ground TNC
| sleeve
. | (same as
other plug ground)
|
| tip
|__________________________________audio input TNC
2.5mm stereo plug into mic jack
Tip to TNC audio output through 0.1 to 1.o microfarad capacitor
with parallel resistor 4.7 to 33K ohm to PTT switch
Ring open
Sleeve to TNC ground
3.5mm mono plug
tip to TNC audio input
sleeve to TNC ground (same ground as other plug)
Data received as FAX from Alinco this morning (11 NOv 93)
Sorry about the graphics, so much for ASCII
Milt